Rechargeable Fireball Instructions

Thank you for purchasing the Blazin' Bison Fireball. If you have any questions, or if your product was damaged

during transit, please contact us at hello@blazin.io for immediate assistance.
Customer Service is our top priority and we will do whatever is necessary to assure your satisfaction.


In the Box:
-  Lantern
-  Rechargeable Battery Pack Installed in Unit
-  USB Power Cord


General Operation:
- Lantern should be fully charged for 6 – 8 hours prior to initial use.
- When lantern is OFF the “ON” button acts as a beacon and blinks green.
- When the battery level falls below 30% the “ON” button beacon will turn and stay red.


Operating Your Lantern:
1. When lantern is OFF the “ON” button will blink green
2. Press once – Medium
3. Press twice – Low
4. Press three times – High
5. Press four times – Strobe
6. Press five times – Off
Operating Dimmer Switch:
When the lantern is ON, for any mode other than strobe, hold the “ON” button for three
seconds and the light will begin to gradually dim and then gradually return to the original level.

Charging Your Lantern:
1. Turn lantern off
2. Plug Micro USB end of cable into lantern
3. Plug USB end of cable into any USB port (wall outlet, car charger, computer)
4. “ON” button will turn red until fully charged then change to green
5. Full charge is complete in 6-8 hours
6. Max input and output voltage/current is DC 5V/1A, use appropriate charger
Contact Information for Questions or Comments:
If you should need any assistance with your lantern please contact our Customer Service at hello@blazin.io
and we will assist you immediately.

Is this article helpful?
0 0 0